Components:

• 1" stainless steel manifold bar
• with or without 1 heat meter section
• Primary connection horizontal or from below
• 2...12 heating circuits (further heating circuits on request)
• pre-installed and leak-tested ready for connection
• on sound-absorbing brackets (DIN 4109)

Connections:

• primary side: ¾" IG horizontal -H, bottom -U (standard primary left -L, optionally right -R)
• secondary side: ¾" male Eurocone downwards, for standard compression fittings

Heating circuit manifold

• Storey manifold 1"
• Flow and return: Venting

Connection assemblies (primary side)

without heat meter section

• Flow and return: ¾" ball valves 100 % open and detachable screw connections

alternatively

with universal heat meter section - type UNI

• Flow pipe:
  • ¾" ball valve with direct sensor connection M10x1 for direct sensor DF∅ 5.2
  • Manifold connection with detachable screw connection
• Return flow
  • Plastic long nipple ¾" x 110 mm for mounting heat meter (observe installation dimensions)
  • upstream and downstream detachable screw connections and ¾" ball valves 100% open, ball valve on primary side with direct sensor connection
  • Manifold connection with detachable screw connection

Installation in a built-in cabinet

• Design suitable for installation in masonry, stud walls and pre-wall installation, among others
• galvanised flush-mounted box (90 mm deep)
• Cabinet installation depth: 90...140 mm adjustable
• break-out bushings as required
• height-adjustable feet up to 65 mm and depth-adjustable removable screed baffle / baffle plate
• Cupboard height 730...795 mm
• usable installation height 610 mm
• Cover:
  • depth-adjustable powder-coated (similar to white RAL9016) frame and plug-in door with slot lock
  • other cover variants on request

Installation in surface-mounted cabinet

• made of galvanised sheet steel
• powder-coated (similar to white RAL9016)
• Enclosure depth: 140 mm
• free feed-throughs at the bottom
• removable cover / screed baffle / baffle plate
• height-adjustable feet
• Enclosure height 700...750 mm
• usable installation height 620 mm
• Cover:
  • powder-coated (similar to white RAL9016)
  • Plug-in door with slot lock