• Flow temperature control of panel heating systems
• Combination of floor and storey heating systems for connection to flow pipes with a high temperature level
• pre-installed and leak-tested ready for connection
• on sound-absorbing brackets (DIN 4109)
• with stainless steel manifold

System separation:

• PHE up to 10 kW as standard (optionally 15 kW), thermally insulated
• Expansion vessel and safety assembly not required
• Pressure equalisation between high and low temperature side
• Air separator with automatic ventilation

Control system:

• pre-adjustable thermostatic valve kvs value 2.3 for Heimeier-compatible actuators
• integrated regulating valves for hydronic balancing
• with fixed value control TKK-TF (thermostatic head, control range 20-70°C and flow temperature sensor ½")
• optionally with weather-compensated control TRHK 114
• Wilo PARA 25-130/6-43 SC high-efficiency pump
• Overheating protection wired at the factory (optional)
• with flow thermometer

Connections:

• primary side: ¾" internal thread from below
• secondary side: ¾" male thread Eurocone for standard compression fittings

Heating circuit manifold

Floor manifold 1"

• End pieces with air vent and SFE tap
• Flow pipe:
  • integrated flow meter (0-5 l/min) with sight glass and flow indicator
  • easy to regulate, shut off and seal
• Return flow:
  • integrated thermostatic valves kvs value 1.2 m³/h
  • M30 x 1.5 mm AG for commercially available actuators (stroke 5 mm)

Storey manifold 1"

• Flow and return: Venting

Connection assemblies (primary side)

without heat meter section

• Flow and return: ¾" ball valves and detachable screw connections

alternatively

with universal heat meter section - type UNI

• Flow pipe:
  • ¾" ball valve with direct sensor connection M10x1 for direct sensor DF∅ 5.2
• Return flow:
  • Long nipple ¾" x 110 mm for mounting heat meters (observe installation dimensions)
  • before and after detachable screw connections and ¾" ball valves, ball valve on primary side with direct sensor connection

Installation in a built-in cabinet

• Design suitable for installation in masonry, stud walls and pre-wall installation, among others
• Cabinet installation depth: 140...190 mm adjustable
• galvanised flush-mounted box (140 mm deep)
• break-out bushings as required
• height-adjustable feet up to 165 mm and depth-adjustable removable screed baffle / baffle plate
• Enclosure height 800...965 mm
• usable installation height 610 mm
• Cover:
  • depth-adjustable powder-coated (similar to white RAL9016) frame and plug-in door with slot lock
  • other cover variants on request

Installation in surface-mounted cabinet

• Cabinet depth: 140 mm
• made of galvanised sheet steel
• free feed-throughs at the bottom
• removable cover / screed baffle / baffle plate
• height-adjustable feet - enclosure height 700...750 mm
• usable installation height 620 mm
• Cover:
  • powder-coated frame (similar to white RAL9016)
  • Plug-in door with slot lock

alternatively

Mounting on mounting plate

• galvanised mounting plate
• with fixing holes