• 1 or 2 1" MV distributors for hot or cold water
• 2...4 vertical water meter sections
• pre-installed and leak-tested ready for connection
• noise-damping holders (DIN 4109)
• Connections:
  • primary side: 1" ball valve DN25 and detachable screw connections (suitable for drinking water according to UBA list) - Primary side: 1" Internal thread (standard left -L, optional right -R)
  • secondary side: 3/4" female thread downwards

Universal water meter section - type LN110 (per residential unit)

• Plastic long nipple 3/4 "x110 for mounting water meters (observe installation dimensions and depth)
• detachable screw connections upstream and downstream
• 3/4" ball valve (DVGW) on the secondary side

Installation in built-in cabinet

• Design suitable for installation in masonry, stud walls and pre-wall installation, among others
• Cabinet installation depth: 110...160 mm adjustable - Galvanised flush-mounted box (110 mm deep)
• break-out feed-throughs as required
• optional height-adjustable feet up to 65 mm and depth-adjustable removable screed baffle/deflection plate
• Cover:
  • depth-adjustable powder-coated (similar to white RAL9016) frame and plug-in door with slot lock
  • further optional cover variants possible (from page 88 )

alternatively

Installation in surface-mounted cabinet

• made of galvanised sheet steel
• powder-coated (similar to white RAL9016)
• Cabinet depth: 140 mm - free feed-throughs at the bottom
• removable cover / screed baffle / baffle plate
• height-adjustable feet
• Enclosure height 700...750 mm
• usable installation height 620 mm