• Waste water station with 2 vertical water meter sections and DN40 drain elbow installed in the centre for installation under the washbasin with washbasin drain or with siphon with integrated odour trap
• pre-installed ready for connection and leak-tested
• on noise-reducing brackets (DIN4109)
• in accordance with the valid amended Drinking Water Ordinance, DIN 50930, DIN 1988

Brass version

• Plastic long nipple 3/4" 80 (LN80) or 3/4x110 (LN110) for mounting water meters (observe installation dimensions and depth)
• before and after detachable screw connections and 3/4" on the primary side
• Ball valve in brass (DVGW) - Gunmetal manifolds for connecting 1/2" angle valves and 1 additional 3/4" connection each to the left / right

Gunmetal version

• Plastic long nipple 3/4" 80 (LN80) or 3/4x110 (LN110) for the installation of water meters (observe installation dimensions and depth)
• before and after detachable screw connections and DN15 ball valve on the primary side in gunmetal (DVGW)
• Gunmetal manifolds for connecting 1/2" angle valves and 1 additional 3/4" connection each to the left / right

Connections

• 3/4" female thread on the primary side, optionally with 3/4" female thread circulation pipe connection on the hot water side
• secondary side 1/2" female thread to the front for connecting e.g. angle valves and 3/4" female thread to the left / right for further connections

Installation in two-part installation cabinet

• galvanised flush-mounted box (90 mm deep) with pre-punched and bottom-free feed-throughs for easy pipework connection
• 0...50 mm depth-adjustable cover plate for fastening on-site mounting plates with cut-outs for corner valves

Covers, optional

• Type RT: 0...50 mm depth-adjustable powder-coated (similar to white RAL9016) frame and plug-in door with slotted lock for installation depth including enclosure 90...140 mm
• Type AMM: Matt stainless steel cover with depth-adjustable magnetic holder and anti-slip protection
• Type KAM: Limodor cover made of white plastic with depth-adjustable magnetic holder, radio-compatible
• Type FAP: 0...50 mm depth-adjustable powder-coated (similar to white RAL9016) holding frame and tileable hinged door with Wedi insert and push-down lock

Total installation depth incl. cabinet 120 ...170 mm