• 2...6 circuits
• 1 or 2 horizontal hot or cold water distributors
• with or without water meter device
• pre-installed and leak-tested ready for connection
• noise-damping brackets (DIN 4109)

Flow and return

• 3/4" MS manifold bar

Connections

• primary side: 3/4" IG horizontal -H (standard left -L, optional right -R)
• secondary side: 3/4" male Eurocone downwards for standard compression fittings

Sanitary, without counter device

• detachable screw connections and 3/4" ball valve (DVGW) on the primary side

alternatively

Universal water meter section - type LN110
(one water meter section for all circuits)

• Long nipple 3/4 "x110 for mounting water meters (observe installation dimensions and depth)
• before and after, detachable screw connections on the primary side and 3/4" ball valve (DVGW)

Installation in built-in cabinets

• Design suitable for installation in masonry, stud walls and pre-wall installation, among others
• Cabinet installation depth: 90...140 mm adjustable
• galvanised flush-mounted box (90 mm deep)
• break-out feed-throughs as required
• optional height-adjustable feet up to 65 mm and depth-adjustable removable screed baffle / baffle plate
• Cover:
  • depth-adjustable powder-coated (similar to white RAL9016) frame and plug-in door with slot lock
  • other cover variants

alternatively

Installation in surface-mounted cabinet - TYPE ASF

• made of galvanised sheet steel
• powder-coated (similar to white RAL9016)
• Cabinet depth: 140 mm
• free feed-throughs at the bottom
• removable cover / screed baffle / baffle plate
• height-adjustable feet
• Enclosure height 700...750 mm
• usable installation height 620 mm