2...4 heating circuits with heat meter sections

• pre-installed and leak-tested ready for connection
• noise-damping brackets (DIN4109)

Flow and return

• 1" MS manifold bar each
• primary side: 1" ball valves and detachable screw connections
• Air vents and SFE valves

Connections

• primary side: 1" IG (standard left -L, optional right -R)
• secondary side: 3/4" female thread downwards per heating circuit in the flow and return, optional 3/4" male Eurocone for commercially available compression fittings

Universal heat meter section type UNI (per residential unit)

• Flow:
  • Adapter with direct sensor connection M10x1 female thread for direct sensor DF ∅ 5.2 in the distribution manifold
• Return flow:
  • Plastic long nipple 3/4" x110 for mounting heat meters (observe installation dimensions and depth)
  • before and after detachable screw connections and on the secondary side 3/4" ball valves with direct sensor connection M10x1 thread for direct sensor DF ∅ 5.2

Installation in a built-in cabinet

• Design suitable for installation in masonry, stud walls and pre-wall installation, among others
• Cabinet installation depth: 110...160 mm adjustable
• galvanised flush-mounted box (110 mm deep)
• break-out bushings as required
• optional height-adjustable feet up to 65 mm and depth-adjustable removable screed baffle / baffle plate
• Cover:
  • depth-adjustable powder-coated (similar to white RAL9016) frame and plug-in door with slot lock
  • covers with ventilation slots are used as standard when the heat meter section is installed
  • other optional cover variants possible

Installation in surface-mounted cabinet type AS / ASF

• made of galvanised sheet steel - powder-coated (similar to white RAL9016)
• Enclosure depth: 140 mm
• free feed-throughs at the bottom
• removable cover / screed baffle / baffle plate
• height-adjustable feet (ASF)
• Enclosure height 700...750 mm
• usable installation height 620 mm