• without or 1 heat meter section (but with at least shut-off in flow and return)
• 1...2 horizontal or vertical water meter sections with downward connections
• pre-installed ready for connection and leak-tested
• noise-damping holders (DIN 4109)

Heating

• Flow and return: bleed valve or combined drain and bleed tap
• Connections:
  • primary side: 3/4" IG horizontal -H / bottom -U (standard from right -R, optionally from left -L)
  • secondary side: 3/4" male Eurocone for commercially available compression fittings at the bottom

without heat meter section

• Flow and return: detachable screw connection and 3/4" ball valve

alternatively

with universal heat meter section - type UNI

• Flow pipe:
  • ¾" ball valve with direct sensor connection M10x1 thread for direct sensor DF∅ 5.2
• Return flow:
  • Plastic long nipple ¾" x 110 for mounting heat meters (observe installation dimensions and depth)
  • upstream and downstream detachable screw connections and 3/4" ball valves, ball valve on primary side with direct sensor connection M10x1 for direct sensor DF ∅ 5.2

optional (without surcharge)

Allmess heat meter section - type WMZ

• Flow pipe:
  • ¾" ball valve with suitable adapter for direct sensor connection M12x1.5 AG (Allmess DS6) for direct sensor DF∅ 5.2
• Return flow:
  • original Allmess-EAT ¾"x110 with direct sensor connection DS6
  • upstream and downstream detachable screw connections and 3/4" ball valves, ball valve on primary side with direct sensor connection M10x1 for direct sensor DF ∅ 5.2

Sanitary

• 1 or 2 hot or cold water lines
• Straight-through version with 2 angles downwards UU (primary & secondary) or with 1 angle HU (secondary) downwards or vertical
• Connections: primary/secondary side: 3/4" female thread

Universal water meter section - type - LN110

• Plastic long nipple ¾"x110 for mounting water meters (observe installation dimensions and depth)
• before and after detachable screw connections and ¾" brass ball valves (DVGW)

optional (without surcharge)

Allmess water meter section - type WZ

• original Allmess-EAT ¾"x110 (UP6000) for measuring capsule AMES-3-K/W Q3 = 2.5m³/h according to MIDwith direct sensor connection DS6
• before and after detachable screw connections and 3/4" brass ball valves, (DVGW)

Installation in a built-in cabinet
..

Installation in surface-mounted cabinet

//always discuss contents due to text lengths...