• for supplying a consumer unit (apartment, office, ...) with hot water and connecting an uncontrolled heating circuit
• for connection to a heating centre with constant heat supply with a flow temperature of at least 60°C
• 3 different heat exchanger sizes with an output range of 30 ... 45 kW heat output per station ensure adaptation to the required DHW demand
• Heating circuit - heat output approx. 10 kW
• pre-assembled and leak-tested ready for connection
• with noise-reducing brackets (DIN4109) on galvanised mounting plate

TWWS - with unregulated high-temperature circuit

• Copper-soldered heat exchanger
• pressure-controlled proportional flow regulator for constant tap temperatures with changing tap volumes
• Heating circuit connection unregulated with adjustable zone valve (optionally with actuator)
• Water meter section in the cold water connection for recording the total water consumption of the residential unit with: Plastic long nipple ¾"x110 for mounting surface-mounted meters, detachable screw connections before and after
• Heat meter section type UNI for recording the total heat consumption, heating and DHW heating with plastic long nipple ¾ " in the return and direct sensor connection in the flow before and after detachable screw connections
• Attention! Only use heat meters with a high sampling rate
• Optionally with Allmess DS6 heat meter section
• Strainer in the primary heating connection and in the cold water connection
• Pipework completely stainless steel 18x1.0
• Connections: ¾" union nut, flat sealing from below
• Mounting plate W740 x H750 mm
• Mounting depth 170 mm